Miele WT946 IS WPS Washer/Dryer User Manual


 
Separate drying
The separate drying programme
must be used if the load in the wash
programme is greater than the
maximum load permitted for drying,
or if you only want to dry part of the
load that was washed.
Make sure that the WASHING
programme selector is at the
Finish
position. Otherwise the washing
programme will begin before the
drying programme.
Before drying
APreparing the laundry
^ Sort the laundry according to type of
fibre / weave and the residual
moisture content. This will help
towards achieving an even drying
result.
BSwitch the machine on
^
Press in the
I-ON/0-OFF button.
COpen the drum door
^
Press the
Door button
and open the
drum door.
DLoad the drum
^
Unfold the laundry and load loosely
in the drum.
Maximum load
:
Cottons . . . . . . . . . . . . . . . . . . . . 2.5 kg
Minimum iron . . . . . . . . . . . . . . . . 1.0 kg
Timed drying . . . . . . . . . . . . . . . . 2.5 kg
Make sure you have removed any
detergent dispensing aids, e.g.
plastic dispenser balls, before
drying. These dispensers can melt
during the drying programme and
cause damage to the machine and
the laundry.
Do not overload the drum.
Overloading can cause unnecessary
wear and tear to the laundry and
give a disappointing drying result.
EClose the drum door
Make sure that no garments are caught
between the drum door and seal.
FOpen the stopcock
DRYING
32