Filter
Top Products
Delay start
JSelect delay start if required.
^ Press the
Delay start
button. Each
press on the button increases the
delayed time:
– by 30 minutes up to 10 hours,
– by 1 hour from 10 hours upwards.
To delete delay start
^ Press the
Delay start
button once
when 24^ is showing in the display.
KPress the START button.
This starts the programme. The
maximum duration for the programme
will appear in the display.
Note: If
Delay start
has been selected
the display will show the delay period
counting down. Once the delay start
period is completed the programme
begins and the actual programme
duration shows in the display.
At the end of a programme
When the
Anti-crease/Finish
indicator
light comes on the laundry can be
removed from the drum. This light stays
on at the end of the programme and
remains on until the selector is turned
back to the
Finish
position.
LOpen the drum door
^
Press the
Door
button.
MRemove the laundry
^ Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
Check that all the items have been
removed. Items left in the drum
could discolour other items in the
next wash or become discoloured
themselves.
NSwitch off the washing machine
^
Press the I-ON/0-OFF button and turn
the programme selector to
Finish
.
The
Anti-crease/Finish
light will then
go out.
OClose the drum door
Otherwise there is the danger of
objects being placed inadvertently in
the drum. If these remained unnoticed
and were washed in the next load, they
could damage the laundry.
How to wash correctly
26