Filter
Top Products
Important control panel
features
Programme selector
The programme selector is used to set
the basic wash programme and the
temperature for that programme.
Additional option buttons
Additional options can be added to the
basic programme.
Use the top button to select either the
Intensive
, the
Pre-wash
or the
Soak
option or a combination of these
options.
Use the lower button to select the
Water
plus
option.
The indicator light will come on to show
that the additional option has been
selected.
If an additional option is chosen, which
is incompatible with the basic
programme, it cannot be selected.
"Spin" button with indicator lights
Selecting the spin speed
The maximum spin speed which can be
selected depends on the basic
programme chosen.
Maximum
spin
speed
Wash programme
1300 Cottons, Quick wash, Starch,
Drain/Spin
1200 Woollens, Separate rinse
900 Minimum iron, Automatic
600 Delicates
400 Silks
Press the "Spin" button to select a
different spin speed. N.B.: you cannot
select a spin speed higher than the
maximum allowed for the basic wash
programme chosen.
The indicator lights show the speed
selected.
You can also omit the final spin
^
Press the "Spin" button to reach:
–
Rinse hold
The laundry is not spun and remains
suspended in the final rinse water.
This reduces creasing if the laundry
is not going to be removed from the
drum immediately after the end of
the programme.
To continue the programme select a
spin speed. If you want to finish the
programme: Press the
Lid
button.
The water will drain away and the lid
will open.
– Without spin
The laundry is not spun. Spinning
between the rinses is also omitted in
this setting (rinse and interim spin).
Description of the machine
13