Filter
Top Products
With the following guide, minor problems can be fixed without a service call.
The program will not start.
What if … Possible cause Fix
the program indicator
"Anti-crease/End" does
not light, or the START
button does not blink?
The washer has no
power.
Check whether:
–
it is plugged in.
–
if the circuit breaker
has tripped.
the "Door Lock" indica
-
tor blinks?
The lock function is acti
-
vated.
Deactivate the lock
function.
The program stops and a fault indicator blinks.
What if...? Possible cause Fix
the buzzer sounds, and
"Check drain" blinks.
"- - -". appears in the
display?
The drain is blocked. Clean the drain filter and
the drain pump.
The drain hose is too
high.
The maximum drain
pump height is 3 ft.
the buzzer sounds, and
"Water intake" blinks.
"- - -". appears in the
display?
The water inlet is blocked. Open the water valve.
the buzzer sounds, and
either the "Pre-wash" or
"Rinses" indicators of
the sequence display
blink.
"- - -". appears in the
display?
There is a fault. Restart the program.
If the fault message
appears again call
Miele’s Technical Service
Department.
* To turn off the fault indicator light: Turn off the washer with the "On/Off" button
and turn the program selector to "End".
Frequently asked questions
26