Filter
Top Products
Once the flow of water stops:
^ Remove the lint trap lid.
^ Clean out any foreign objects or lint
from the filter.
^ Check that the drain pump impeller
(in the back of the chamber) rotates
freely by spinning with your hand.
^
Clean the inside of the lint trap hous
-
ing.
Remove any detergent deposits or
foreign objects from the threads of
the filter housing and filter unit before
returning the lint trap.
^ Return the lint trap and tighten into
place.
,
If the lint trap is not tightened se-
curely water will leak out when the
machine is used.
After cleaning:
^
Run the "Fine rinse" program.
This step is necessary to activate the
ball valve.
Washer care
24