Filter
Top Products
Memory function
If an additional option is selected for
a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is
chosen again, the washing machine will
display the additional option(s) and / or
spin speed which have been stored for
that programme in the memory.
The machine is delivered with the
memory function deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– Make sure that the programme
selector is at the d Finish position.
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the machine on with the
I-On/0-Off button.
C Wait until the Start button indicator
light comes on . . .
D . . . and then release the Start
button.
E Turn the programme selector to
Minimum iron 60°C:
A P will flash in the display alternating
with the number 0 or 1.
0 = the memory function is
deactivated.
1 = the memory function is
activated.
F Press the Start button to change the
display from 0 to 1 or from 1 to 0.
G Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
61