Filter
Top Products
Water plus system
This is used to select the water intake
setting for the Water plus additional
option.
There are four different options:
Setting 1:
an increase in the rinse water level
Setting 2:
an increase in the water level in the
main wash and
rinses (the washing
machine is delivered with setting 2
programmed as standard)
Setting 3:
an extra rinse cycle in the Cottons and
Minimum iron programmes
Setting 4:
an increase in the water level in the
main wash and
rinses and also an extra
rinse cycle in the Cottons and Minimum
iron programmes
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
–
The washing machine is switched off.
–
The machine is properly closed.
–
Make sure that the programme
selector is at the d Finish position.
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the machine on with the
I-On/0-Off button.
C Wait until the Start button indicator
light comes on . . .
D . . . and then release the Start
button.
E Turn the programme selector to the
Cottons 60°C position:
A P will flash in the display alternating
with the number 1, 2, 3 or 4.
F Each subsequent press on the Start
button selects a different setting.
The number alternating with the P in the
display refers to the settings as follows:
1 = Setting 1
is selected
2 = Setting 2
is selected
3 = Setting 3
is selected
4 = Setting 4
is selected
G Switch the machine off with the
I-On/0-Off button.
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
58