Filter
Top Products
Changing the decor panel
Note: The door should be closed
when installing the decor panel.
^
On the door lock side remove the
4 screws (3 on the side and 1 under
-
neath) and the door strip.
^
Loosen the remaining 7 screws on
the lower and side decor strips until
the decor panel can be bowed
slightly and taken out.
^
Insert the new panel.
^ Reassemble in the reverse order and
tighten the screws.
Decor panel dimensions
Width: 23
11
/
16
Height: 23
1
/
8
Thickness:
1
/
16
Panels between
1
/
16
and
1
/
8
thick
require an adapter strip available from
the Technical Service Department.
Fitting a toekick panel
The appliance toekick below the door
can be concealed using a toekick
panel.
The height and depth of the appliance
toekick cannot be altered.
A cut-out must be made in the toekick
panel around the ventilation slots. If the
ventilation slots are blocked the
machine will not dry efficiently.
INSTALLATION INSTRUCTIONS
22