Filter
Top Products
What to do if,...? Cause . . . Remedy . . .
. . . the "anti-crease"
indicator starts flash
-
ing?
–
Turn the program selector
to "finish".
–
Turn the machine off and
then on again.
–
Select a program.
–
Press the "Start" button.
If the indicator lamp starts
flashing again, this indicates a
fault in the machine.
Please contact the Miele Ser
-
vice Dept.
. . . the drum door
opens during the dry-
ing cycle?
The vent is blocked or
the lint filter is clogged.
Clean the vents and the lint fil
-
ter.
A fabric softener sheet
caused the dryer to
overheat.
Do not use fabric softener
sheets. Add fabric softener to
the wash.
If the drum door opens again,
the Miele Service Dept. should
be contacted.
. . . the interior drum
light fails to function?
See "Changing the light bulb".
...you have to open
the door in the event
of a power failure?
See "Power failure –
Emergency door release".
Frequently asked questions
15