Filter
Top Products
With the following guide, minor problems can be fixed without a service call.
What if Possible fault Fix
. . . the tumble
dryer fails to start
when turned on?
Check whether the "On" in
-
dicator lights up. If so, fail
-
ure to start may be due to
an incorrect program se
-
lection procedure.
Repeat the program selection
procedure in the correct se
-
quence, see "Using the dryer".
If the "On" indicator lamp
does not illuminate, check
that:
–
The "ON/OFF" button is
pressed in.
–
The door is properly closed.
–
The machine is plugged in
and the fuse or circuit
breaker has not tripped.
. . . the laundry is
not dry enough?
The load consisted of dis-
similar items (size and fab-
rics).
Select a longer drying pro-
gram.
Small loads or individual
items may cause the pro-
gram to terminate prema-
turely.
Use a timed drying program.
The load was too large for
the "Load size - Half" posi
-
tion.
Press the "Load size - Full" but
-
ton when drying larger loads.
. . . the drying
times are too
long?
The lint filter is clogged. Clean the lint filter in the door.
The laundry was not spun
in the washer for a suffi
-
cient time.
Make sure that the laundry is
thoroughly spun before drying.
Frequently asked questions
14