Filter
Top Products
The washer is equipped with a
electronic control which determines the
load size automatically. The washer
determines the required water
consumption for each load and
depending on quantity and water
absorbency of the laundry. Different
program sequences and wash times
will result.
The program sequence shown here
represents the basic program with a
maximum load. Possible "Extras" are
not considered.
The washer’s sequence display will
indicate the current cycle of the
selected wash programs.
Special features in the program
sequence:
Anti-crease
The drum continues to turn up to 30
minutes after the program ends to
prevent creases. The washer can be
opened at any time. Exception: The
program "Woollens" has no anti-crease
feature.
1)
High Spin
Before the wash program starts, a
high spin is carried out to remove air
from the pillows. After the spin the
water is taken in by the compartment
j for the main wash.
2)
Pre-rinse
To rinse dust, a pre-wash without
detergent is automatically added to
the program.
3)
Outerwear
The items will be spun only after the
main wash.
4)
Pre-rinse
To remove heavy soiling the laundry
will be pre-rinsed twice.
Program sequence
28