Filter
Top Products
Connect the washer, to the water
mains. Do not use old hoses.
Check the intake hoses regularly for
damage. They should be replaced
regularly to prevent water damage.
Faulty components must only be
replaced with genuine Miele spare
parts. Only when these parts are fitted
can the safety standards of the
machine be guaranteed.
If the power cord is damaged it
must only be replaced by a Miele
Service technician with a genuine Miele
power cord.
Use
This appliance is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
installation in these applications. Please
contact the Miele Technical Service
Department with specific requirements.
Do not install this machine in rooms
where temperatures below freezing
may occur. Frozen hoses may burst
under pressure. The reliability of the
electronic control unit may be impaired
at temperatures below freezing.
Before using the machine for the
first time, check that the shipping
struts at the rear of the machine have
been removed (see "Installation").
During spinning, if the shipping struts
are still in place damage may result to
both the machine and adjacent
furniture or appliances.
Turn off the water supply if the
machine is to be left for any length
of time (e.g. vacation), especially if
there is no floor drain (gully) in the
immediate area.
Overflow hazard!
Check that the drain can
accommodate the water flow before
operating the washer.
Make certain the drain hose is secured
in the drain. Otherwise the force of the
expelled water could cause the drain
hose to come out of the drain.
Be sure that foreign objects (e.g.
nails, pins, coins, paper clips) do
not find their way into the machine.
These items may damage the
machine, which may also cause
damage to the laundry.
IMPORTANT SAFETY INSTRUCTIONS
5