Filter
Top Products
What if ... Possible cause Solution
A program cannot
be started, the
display remains
dark.
The fault cannot be
detected immediately.
–
Is the dryer connected to
the power mains?
–
Is the door closed?
–
Are the fuses blown?
The drum light does
not come on.
The light turns off
automatically (energy
saving).
After closing and opening the
door the light comes back on.
The bulb may be bad or
burnt out.
Change the light bulb. See
"Dryer Care".
The display shows a
foreign language.
A different language was
selected under "Settings -
Language J".
Select the desired language.
The flag symbol leads you to
the setting.
The "Start" indicator
flashes when
selecting a program.
This is not a fault.
It indicates that the
program can be started.
After the program is started,
the indicator lights steadily.
The display is dark,
the ring of light
around the jog
shuttle does not
light.
The "Start" indicator
flashes slowly.
The display and the
program selector go into
"Standby" mode to save
energy.
Press any button to turn the
display and jog shuttle back
on.
If pressing a button does
not bring the display and
light back on, a fault has
occurred.
Contact the Miele Technical
Service Department.
Frequently asked questions
30