Miele B990 Iron User Manual


 
~
Before connecting the appliance,
ensure that the connection data on the
data plate (fusing, voltage and
frequency) match the household
electrical supply. If in doubt, consult an
electrician.
~
Do not use an extension cord to
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance
(e.g. danger of overheating).
~
Defective components should be
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
~
The appliance is completely isolated
from the electricity supply when:
it is turned off at the wall switch and
unplugged, or
the circuit breaker has been
"tripped".
~
Do not damage, remove or bypass
the safety components or control
elements of the appliance.
~
Only operate the rotary iron when all
removable outer casings are fitted so
that it is impossible to touch an
electrical component or moving part.
~
This equipment has not been
designed for maritime use or for use in
mobile installations such as aircraft or
recreational vehicles. However, under
certain circumstances it may be
possible for an installation in these
applications. Please contact the
nearest Miele Dealer or Miele Technical
Service with specific requirements.
Use
~
Be aware of loose fitting or hanging
clothing when using the rotary iron.
Items such as wide sleeves or apron
strings could be wound in the roller.
~
Remove all jewelry and tie back long
hair before ironing.
~
Never allow children to play on or
near the rotary iron or to operate it
themselves.
~
When the rotary iron is heated there
is a danger of burns:
if the heater plate is touched.
if the foot pedal is pressed down
while fingers or hands are positioned
between the raised heater plate and
the roller to smooth an item.
~
Never drape items over the heater
plate when it is heated.
This is a fire hazard. Hang laundry on
the swing out bar.
IMPORTANT SAFETY INSTRUCTIONS
4