Filter
Top Products
^
Insert the long edge of the new
ironing cover into the retaining slot
with the side seams inside (upside
down). Keep side ties hanging free
and smooth out.
^
Turn the roller by hand in the
direction you iron (see arrow) until the
retaining slot is at the bottom.
^
Turn the rotary iron on.
^
Press the foot pedal and "iron" the
new cloth around.
Do not let the cords get under the
cloth as it turns.
After the roller has gone through three
or four revolutions and the end of the
ironing cover is under the heater plate:
^ Turn the rotary iron off while keeping
the foot pedal pressed down.
The ironing cover is held firmly in place
with the heater plate which is still
lowered.
Cleaning and Care
28