Filter
Top Products
Repairs should only be carried out by an authorized technician in accordance
with local and national safety regulations. Unauthorized repairs could cause
injury or appliance damage.
The rotary iron does not turn on.
Possible fault Solution
The rotary iron has no power. Plug the machine in and check if the
circuit breaker has tripped.
The laundry is not properly or poorly pulled in.
Possible fault Solution
This tends to happen when ironing
delicate items with a new machine.
Continue ironing, the issue is usually
resolved after 5-10 minutes of ironing.
New iron cover A new rotary iron cover should be
washed at 140°F (60°C) for the laundry
to be ideally pulled in.
Lime or starch deposits on the heater
plate.
Clean with household cleaners or
dishwasher detergent.
Creases/Folds occur
Possible fault Solution
The heater plate is soiled (lime
deposits).
Clean the heater plate with household
cleaners or dishwasher detergent.
The rotary iron cover is heavily soiled.
Possible fault Solution
Deposits Wash the iron cover with household
detergent at 140°F (60°C) or replace
with a new one. See "Washing or
replacing the ironing cover".
The heater plate does not press on the roller.
Possible fault Solution
The emergency release was activated. Press the emergency release down
(see "Power failure").
Frequently asked questions
30