The system lock prevents the dryer
being used without your knowledge.
It can be activated if wished.
The dryer's electronics are then locked.
The dryer can still be switched on but a
programme cannot be started.
–
If an attempt is made to start a
programme, the indicator light for the
Gentle tumble button will come on
and a key symbol 0-§ will appear in
the display.
The door is not locked and can be
opened at any time.
To activate the lock
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
A Press the Gentle tumble button and
keep it pressed in whilst carrying out
steps B to E.
B Press the jk button.
The Automatic plus indicator light will
come on.
C Slowly turn the programme selector
three positions stage by stage in a
clockwise direction.
Each of the three programme
indicator lights must come on one
after the other.
D Now slowly turn the programme
selector six positions stage by stage
in an anti-clockwise direction.
Each of the six programme indicator
lights must come on one after the
other.
The indicator light for the Gentle tumble
button will flash, and the key symbol
0-§ will appear in the display.
E Release the Gentle tumble button.
The electronics have now been locked.
^
Switch the dryer off.
To deactivate the lock
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
^ The procedure is the same as for
activating the lock. Carry out steps A
to E as described previously.
At step E the indicator light for the
Gentle tumble button will stop flashing
and the key symbol 0-§ will go out.
The electronics are no longer locked.
Electronic system lock
51