Filter
Top Products
Replacing
^
Fit the filter back on the handle. Make
sure it is the correct way round.
To ensure that the filter is positioned
correctly in the front of the heat
exchanger unit:
^
First insert the handle with the filter
attached over the two guide pins.
Make sure that the yellow dot on
the handle is on the right.
^
Push the filter in completely.
^
Close the access flap.
The filter must be fitted correctly and
the access flap closed to ensure
that water cannot leak from the
condenser system and to ensure
that the dryer functions efficiently.
Cleaning the tumble dryer
Disconnect the dryer from the mains
electricity supply.
^
Clean the housing, control panel and
door seal with a slightly damp cloth
and a mild detergent or soapy water.
^ The drum and other stainless steel
parts can be cleaned with a suitable
proprietary stainless steel cleaner
following the manufacturer's
instructions.
Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaners. These could
damage plastic sufaces and other
parts.
^
Dry all parts with a soft cloth.
Cleaning and care
31