Filter
Top Products
Keypad tone
An audible tone sounds each time a
button is pressed.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, ensure that:
–
The tumble dryer is switched off.
–
The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C . . . and then release the Start/Stop
button.
D Press the Gentle tumble button
seven times.
– The Gentle tumble indicator light will
flash on and off slowly once and then
on and off quickly once.
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Keypad tone deactivated
(factory default setting)
I Keypad tone activated
(the Automatic plus indicator light will
also flash)
E Pressing the Start/Stop button
switches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to D.
^ Switch the dryer off after step D.
Programmable functions
60