Filter
Top Products
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
–
The washing machine is switched off.
–
The machine is properly closed.
–
The programme selector is at Finish.
A Press the Start button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
I-On/0-Off button.
C Wait until the Start indicator light
comes on . . .
D . . . and then release the Start
button.
E Turn the programme selector to the
Cottons 75°C position:
The Soak/Pre-wash sequence indicator
light will briefly flash twice in 2 second
intervals, to show that factory Setting 2
is stored in memory.
F Each subsequent press on the Start
button selects a different setting (see
list on previous page).
The Soak/Pre-wash sequence indicator
light will flash:
–
x1 = Setting 1
– x2 = Setting 2
– x3 = Setting 3
– x4 = Setting 4
G Switch the machine off with the
I-On/0-Off button.
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
59