Filter
Top Products
Delay start/time left display
Display field "TIME" (hours
mins)
The display field to the right of the pro-
gramme sequence display has a dual
function:
1. Time left display
2. d Delay start
The indicator lights to the left of the
TIME display field show which function
is active.
Time left display
The programme duration is shown in
hours and minutes once
– a basic programme has been se-
lected
– the delay start period has elapsed.
After the programme has started the
time left counts down in one minute in-
tervals .
At the beginning of a programme, the
duration of the programme for a full
load will be displayed.
In the COTTONS programme, the type
and volume of the wash will be moni-
tored during the first water inlet phase.
With a part load the time display shows
a shorter time of up to 45 minutes.
Delay start
A programme start time can be de-
layed by a maximum of 9 hours 30
minutes.
1 Programme selection
First carry out steps
1 to 5 described
on page 11. Then for a delayed start:
2 Press the delay start touch pad.
The “d Delay start ”
indicator light comes on.
Set the delay start period by pressing
the “$” or “>” touch pads under the
TIME display field as many times as is
required.
1 x press = 30 mins
Each press lengthens (“>”) or
shortens (“$”) the delay time by 30
minutes
3 Press the “START” touch pad.
The delay start time counts down at
minute intervals.
Once the delay start period is com-
pleted the programme begins and the
actual programme duration shows in
the display. The "Time left" indicator
lights up.
The delay start can be changed again
after pressing the "START" touch pad.
To cancel the delay start option:
Press the Delay start touch pad. The
programme begins immediately.
Delay start/time left display
24