Filter
Top Products
Programme sequence
COTTONS MINIMUM IRON DELICATES
Soak optional optional optional
Pre-wash optional optional optional
Main wash
ßßß
Top-up rinse from 70°C – –
Graduated rinsing – from 50°C from 50°C
No. of rinses – normal 3 or 4
1)
33
–Part load 2 3 3
–Short wash 2 2 3
Rinse and interim spin (rpm) max. 1000 max. 500 –
Final spin (rpm) max. 1600 max. 900 max. 600
Anti-crease spin and loosen max. 30 mins max. 30 mins max. 30 mins
Rinse hold optional optional optional
Without final spin optional optional optional
Wash rhythm normal normal gentle action
Water level – Wash
– Rinse
low
2)
low
2)
low
2)
medium
2)
high
high
Explanations:
ß Function included
– Function not included
1)
A 4th rinse automatically switches in if there is too much foam in the drum, or if a spin speed lower
than 800 rpm has been selected.
2)
Increasing the water level:
The water level can be increased from a low level to a higher level by pressing the “Water plus” button.
Top-up rinse:
Additional water flows into the drum, and the suds are cooled slightly. Hot water might damage plastic
drain pipes.
Graduated rinsing:
The suds are cooled at the end of the wash cycle by water flowing in and being pumped away at inter-
vals. This minimises the danger of creasing, by avoiding sudden temperature changes.
WOOL:
Wool is susceptible to damage from movement when it is wet. Drum movement times during the pro-
gram are shorter, and the drum rotates more slowly.
Programme sequence
20