Maytag MAH-2 Washer User Manual


 
6
Review Screen – This screen
reviews your selections before
starting the washer. You may
press Start/Pause to begin
washing or press a displayed
choice to change previous selec-
tions.
Options Screen – The option
choices on the left turn the
options on or off. Some option
choices on the right show an
additional screen with multiple
choices. When the desired selec-
tions are made, touch Continue
to see the review screen once
again.
If you are satisfied with the selec-
tions, press the Start/Pause pad
to begin the cycle.
Step 4
Step 5
Step 6
cotton/sturdy
fabrics
Press "start/pause" or
change your selections below.
hot wash
cold rinse
normal soil
16 min. wash
options
medium cycle chime
extra rinse ON
remind chime ON
medium end of
cycle chime
wrinkle free
spin
Options
continue
extra rinse
on off
pre-soak
on off
stain cycle
on off
remind chime
on off
delay wash
on off
Special Note: Press Back or Home for previous touchscreen.
extra rinse – A fourth rinse at the end of the cycle to more completely
remove laundry additives and perfumes.
end of cycle chime – Touch “Loud”, “Medium”, “Soft” or “Off” to set
the volume level of the end of cycle chime. Touch “Continue” to accept the
selected volume setting.
presoak – Adds 15 minutes of mostly soaking with minimal tumbling. Can be
selected with any cycle.
spin selection –This allows the proper spin speed selection for specific loads.
Max Extract should be selected for jeans, towels, and bedding. Wrinkle Free
for khakis, dress shirts and other Permanent Press or Wrinkle Free items.
Regular spin for anything else.
stain cycle – Adds time to the wash and rinses for better stain removal.
Automatically provides a fourth rinse. Can be selected with any cycle.
delay wash – Allows the start of any cycle to be delayed for up to 12 hours.
Touch the up or down arrow under hour and minutes to set the time.
remind chime –When on,the washer will chime every 5 minutes for 2 hours
or until the door is opened.