LG Electronics WD(M)-14105FD Washer/Dryer User Manual


 
45
ow to use washer
H
Start/Pause
• This Start/Pause( ) button is used to
start wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is needed,
press Start/Pause( ) button.
• When in pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when pause is selected,
or at the end of the wash cycle.
1. Start
2. Pause
Wash
1. Main Wash
2. Pre Wash + Main Wash
• By rotating and
Pressing the Program
Dial button, the wash
type can be selected.
- Main Wash
- Pre Wash + Main Wash
- Normal
- Super
- Rinse Hold
- No rinse
- Soak
- No Wash
Main Wash course is available for lightly or
normally soiled laundry.
• If the laundry is heavily soiled, “Pre Wash +
Main Wash” course is effective.
Pre Wash is available in Whites, Coloureds
and Synthetic program.
3. Soak
• Operations about 60 minutes, before “Main
Wash” course.
“Main Wash” course is followed by “Soak
Wash” course without drain.
“Soak Wash” is available in Whites,
Coloureds and Synthetic program.
Coloureds Time left122min
Wash Main
Pre+Main
Soak
No Wash
Rinse
Spin
Temp
Coloureds Time left122min
Wash Normal
Super
Rinse Hold
No rinse
Temp
Rinse
Spin
1. Normal
2. Super
3. Rinse Hold
Rinse
• By rotating and
pressing the Program
Dial button, the rinse
type can be selected.
Whites / Coloureds / Synthetic performs 3 Rinses
Wool / Hand Wash /Delicate / Quick 30
performs 2 Rinses
• Normal + 1 more rinse time.
• Use the Super rinse when additional
rinsing is desired to remove excess dirt
and detergent soiled loads.
• Is selected by rotating and pressing the
Program Dial button repeatedly this function
leaves clothes in the washer; suspended in
the water after a rinse without entering into
spin.
• To proceed through to a drain or spin, press
the Start/Pause( ) button.
• If you want to drain only, select “No spin” of
the spin course.
The required lamp will light up for identification.