44
ow to use washer
H
Programme
1. Power
2. Initial Program
Power
• Press the Power( ) button to turn
power on and off.
• To cancel the Time Delay function, the
Power( ) button should be pressed.
• When the Power( ) button is pressed,
the washer is ready for Coloureds program.
And the other initial conditions as follows.
• So, if you want to advance into the
washing cycle without changing the
program, just press Start/Pause( )
button and then the washer will proceed.
Initial program
• [WD-16101FD / 16106FD]
-Coloureds Program / Main Wash /
Normal Rinse / 1600 rpm / 40˚C
• [WD-14101FD / 14106FD]
-Coloureds Program / Main wash /
Normal Rinse / 1400 rpm / 40˚C
1. Program Selection
2. Program
• When Start/Pause
( )
button is pressed,
the
Coloureds program is automatically
selected.
• How to select program and course(option)
1. Press the Power( ) button.
2. Rotate the Program Dial button and select
desired program.(Whites, Coloureds...)
3. Press the Program Dial button.
4. Rotate the Program Dial button and Select
desired course. (Wash, Rinse, Spin, Temp...)
5. Press the Program Dial button and select
desired course option.
6. Press the Program Dial button.
7. Press the Start/Pause( ) button
- By rotating the Program Dial button, the
program is selected in order of “Coloureds
-
Synthetic
-
Delicate
-
Wool
-
Hand Wash
-
Quick 30
-
Rinse+Spin
-
Spin only
-
Drain only
-
Whites”.
Regarding to the laundry type for each program
Please refer to the page41.
- Whites
- Coloureds
- Synthetic
- Delicate
- Wool
- Hand Wash
- Quick 30
- Rinse+Spin
- Spin only
- Drain only
Power
Reset Help
www.dreamlg.com
Option Time Delay Reset Help
Start/Pause Power
(4) (5) (6) (7) (8) (2) (3) (1)
(4) Button : Option
(5) Child lock
(6) Button : Time Delay
(7) Button : Reset
(8) Button : Help
(1) Button : Power
(2) Dial : Programme
(3) Button : Start/Pause