Filter
Top Products
5
nstallation
I
1. To prevent internal damage during
transport, the special 3 bolts are locked.
Before operating the washer, remove
the bolts and braces.
• If they are not removed, it may cause heavy
vibration, noise, and malfunction.
3. Take out the 3 bolts and braces by twisting
slightly the braces. Keep the 3 bolts and
braces and the wrench for future use.
• Whenever the appliance is transported, the
shipping bolts and braces must be replaced.
The appliance is fitted with shipping bolts to prevent internal damage during transport.
2. Unscrew the 3 bolts with
the wrench supplied.
4. Close the holes with the caps supplied.
Shipping bolts
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Removing shipping bolts
cap