Filter
Top Products
24
SPIN TROUBLE
Check the sensor
(Pressure) or hose
(Sensor). If the problem
is on the sensor or the
hose, replace the sensor
or the hose.
Normal
Correct the connector.
Correct the connector.
Replace the STATOR
ASSEMBLY
(4417EA1002D)
Check on the spinning, is the frequency of the
water level 248 or more? The frequency can be
checked by pressing the Rinse Hold and Spin
buttons at the same time on the program.
When pressing Intensive, Rinse Hold and POWER
buttons at the same time after power off, press the
Start/Pause button 2 times, is the drum low speed
spin?
Is it disconnected, or disassembled?
[White : 3pin(
), Red:3pin( ), Red:3pin( ),
Natural:4pin(
)]
Is it disconnected, or disassembled?
[White:3pin (
), White:5pin ( )]
Check the motor connector, Is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
Resistance of terminal:
About 5 10
Replace the MAIN PWB ASSEMBLY