Filter
Top Products
TEST OPERATION
9
Connect the power plug to
the outlet.
In case of Coloreds program.
Connect the inlet hose.
Preparation for Press the POWER button. Press
the
Start/Pause
washing. button.
Check if the drum rotates Check if water is supplied
clockwise and counterclockwise.
through the detergent
dispenser.
Press the Time Delay and Rinse
Hold buttons simultaneously and
the present temperature will be
displayed.
Power off and then power on.
Check if the door can be
opened after 3 minutes.
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating. Check automatic reverse Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door