Filter
Top Products
Important Safety
Instructions (continued)
Avoid fire hazard or
electrical shock. Do not use an
adaptor plug or extension cord or
remove grounding prong from
electrical power cord. Failure to
follow this warning can cause
serious injury, fire or death.
Groundingtype
wall receptacle
Donotunderany "_
circumstances,cut, |
remove,or bypass |
he grounding prong I
omthisplug, j)
ord with 3 prong
grounding plug
CORRECT
Use this way ONLY
Do not use or mix
liquid chlorine bleach with other
household chemicals such as
toilet cleaners, rust removers, acid
or products containing ammonia.
These mixtures can produce
dangerous fumes which can cause
serious injury or death.
Prevent Injury
To prevent shock hazard and assure stability during operation,
the washer must be installed and electrically grounded by a qualified service
person in accordance with local codes. Installation instructions are packed in
the washer for installer's reference. Refer to INSTALLATION INSTRUCTIONS
for detailed grounding procedures. If the washer is moved to a new location,
have it checked and reinstalled by aqualified service person.
To prevent personal injury or damage to the washer, the
electrical power cord of the washer must be plugged intoa properly grounded
and polarized 3-prong outlet. The third grounding prong must never be
removed. Never ground the washer to a gas pipe. Do not use an
extension cord or an adaptor plug.
Follow package directions when using laundry products,
Incorrect usage can produce poisonous gas--resulting in serious injury or
death.
Do not combine laundry products for use in 1 load unless specified on the
label.
Do not mix chlorine bleach with ammonia or acids such as vinegar.
To prevent serious personal injury and damage to the washer:
All repairs and servicing must be performed by an authorized
servicer unless specifically recommended in this Owner's Guide. Use
only authorized factory parts.
Do not tamper with controls.
Do not install or store the washer where it will be exposed to the weather.
Do not install on carpet. Install washer on a solid floor. It may be
necessary to reinforce the floor to prevent vibration or movement.
To reduce the risk of electric shock, disconnect this appliance
from the power supply before attempting any user maintenance. Turning the
controls to the OFF position does not disconnect this appliance from the
power supply.
To prevent injury, do not reach into the washer while parts are
moving. Before loading, unloading or adding items, push in the cycle selector
knob and allow the drum to coast to a complete stop before reaching inside.
[] Failure to comply with these warnings could result in serious personal
injuries.
[] This washer isequipped with an electrical overload protector. The motor
witl stop if it becomes overheated. The washer will automatically restart after a
cool down period of up to 30 minutes, if the washer has not been manually
turned off during this time.
Note: The instructions appearing in
this Owner's Guide are not meant to
cover every possible condition and
situation that may occur. Common
sense and caution must be
practiced when installing, operating
and maintaining any appliance,
SAVE THESE INSTRUCTIONS
As an ENERGY STAR _ Partner,
Frigidaire Home Products has determined
that this product meets the ENERGY STAR ®
guidelines for energy efficiency.
4