Filter
Top Products
If required, pour fabric softener into the
compartment marked
(the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required
programme
Turn the programme dial to the required
programme. The washing machine will
automatically select the maximum spin value
provided for the programme you have
chosen and the display will show the
duration, calculated on the basis of the
maximum load for each type of fabric.
Pressing the corresponding buttons to
change those values. The green pilot light of
the button 8 starts flashing.
The dial can be turned either clockwise or
counterclockwise. Turn to position «Off» to
reset programme/Switching the machine off.
At the end of the programme the
selector dial must be turned to
position «Off» , to switch the machine
off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the
red pilot light of button 8 will blink 3
times to indicate a wrong selection.
The machine will not perform the
new selected programme. The
message Err is displayed for a few
seconds. The machine will not
perform the new selected
programme.
Select the spin speed or
None option
Press button 3 repeatedly to select the
required spin speed or to select «None»
option. If you select this option, all spinning
phases are suppressed.
The relevant light will light up.
Select the desired
options
Press buttons 4,5,6 and 7 to select the
available options. Depending on the
programme, different options can be
selected together. These must be selected
after choosing the desired programme and
before pressing button 8.
13