Filter
Top Products
Select the spin speed or
Rinse Hold option by
pressing button 3
The relevant light will light up.
When selecting a programme, the light
corresponding to the maximum speed
allowed for that programme will illuminate.
Select the available
options by pressing
button 4
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired
programme and before starting the
programme.
When these buttons are pressed, the
corresponding pilot lights illuminate. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, the
integrated red pilot light of the button 5
flashes for 3 times.
For the compatibility among the
washing programmes and the options
see chapter «Washing Programmes».
Start the programme by
pressing button 5
To start the selected programme, press the
button 5 , the corresponding green pilot light
stops blinking. The pilot light Wash and
Door lock illuminate. The appliance starts
operating and the door is locked.
To interrupt a programme which is running,
press the button 5 : the corresponding green
pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 5
again .
If an incorrect option is selected, the red pilot
light of the button 5 blinks 3 times.
Altering an option or a
running programme
It is possible to change some options before
the programme carries them out.
11