Filter
Top Products
Measure out the
detergent
Measure out the detergent and the
fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
required, pour it into the main wash
compartment
or in the appropriate
compartment if it is required by the selected
programme or option (see more details in
«Detergent dispenser drawer» ).
If required, pour fabric softener into the
compartment marked
(the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required
programme by turning
the programme selector
dial
Turn the programme selector dial to the
required programme. The washing machine
will automatically select the maximum spin
value provided for the programme you have
chosen. You can change this value by pressing
the corresponding button. The green pilot
light of the button 5 starts to flash.
The selector dial can be turned either
clockwise or counterclockwise. Turn to
position « Off » to reset programme/
Switching the machine off.
At the end of the programme the
selector dial must be turned to
position «Off» , to switch the machine
off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 5 will blink 3 times
to indicate a wrong selection. The
machine will not perform the new
selected programme.
10