Filter
Top Products
2. Press the Intensive button - the LED
above is on.
To deselect the function press the Intensive
button again. The LED above is off.
Half power
Half power for more gentle drying with
reduced heat. To activate it:
1. Choose the drying programme.
2. Press the Half power button - the LED
above is on.
To deselect the function press the Half
power button again. LED above is off.
Anti-crease
This function prolongs the anti-crease phase
to 90 mins in total. The drum rotates in
intervals during this phase. The laundry
therefore remains relaxed and free of
creases.
To activate it:
1. Choose the drying programme.
2. Press the Anti-crease button - the LED
above is on.
If this additional function is selected, the anti-
crease phase at the end of the drying cycle is
lengthened by 60 minutes. The laundry can
be removed at any time during the anti-
crease phase.
To deselect the function press the Anti-
crease button again. The LED above is off.
Press the Anti-crease button. A 90 minute
anti-crease phase is set. The display now
shows the anti-crease icon. If this additional
function is selected, the anti-crease phase at
the end of the drying cycle is lengthened by
60 minutes. The laundry can be removed at
any time during the anti-crease phase.
Alarm
The appliance is supplied with the Alarm
function deactivated.
When activated, the buzzer sounds:
– At the end of the cycle
– When the anti-crease phase starts or
ends
– When the cycle is interrupted
To activate it:
1. Choose the drying programme.
2. Press the Alarm button - the LED above
is on.
To deselect the function press the Alarm
button again. The LED above is off.
12