Filter
Top Products
4. Use a damp hand to remove the fluff from
the filter in the base . If necessary pull out
and clean the filter with warm water using
a wiper or brush. Clean the inside of the
door, the fluff filter chamber and the
rubber seals of fluff. Insert the fluff filter to
the base.
5. Insert the fluff filter into the filter housing
(it has to audibly lock) and slide it inside
the filter chamber. Close the door in
plinth. Note: If the fluff filter is not
inserted in the filter housing, the filter
housing cannot be slide into the appliance
base.
6. As necessary, approx. once every 6
months, remove the fluff from the heat
exchanger using the sponge supplied.
When doing this, please use rubber
gloves.
Tip: The fluff can be removed more easily if
it is first dampened (e. g. with a laundry
dampener) or with help of vacuum cleaner.
Cleaning the drum
Caution! Do not use abrasives or
steel wool to clean the drum.
Lime in the water or cleaning agents
may form a barely visible lining on the
inside of the drum. The degree to
which the laundry has been dried is
then no longer detected reliably. The
laundry is damper than expected when
removed from the dryer.
Use a standard domestic cleaner (e.g.
vinegar-based cleaner) to wipe down
the inside of the drum and drum ribs.
19