Filter
Top Products
To deselect the function press the Extra
delicate button again. LED above is off.
Intensive
If the laundry is still damp after a standard
drying programme, you can increase the
drying result by using the Intensive function.
1. Choose the drying programme.
2. Press the Intensive button - the LED above
is on.
To deselect the function press the Intensive
button again. The LED above is off.
Anti-crease
This function prolongs the anti-crease phase
to 90 mins in total. The drum rotates in
intervals during this phase. The laundry
therefore remains relaxed and free of creases.
To activate it:
1. Choose the drying programme.
2. Press the Anti-crease button - the LED
above is on.
If this additional function is selected, the anti-
crease phase at the end of the drying cycle is
lengthened by 60 minutes. The laundry can be
removed at any time during the anti-crease
phase.
To deselect the function press the Anti-
crease button again. The LED above is off.
Press the Anti-crease button. A 90 minute anti-
crease phase is set. The display now shows
the anti-crease icon. If this additional function
is selected, the anti-crease phase at the end of
the drying cycle is lengthened by 60 minutes.
The laundry can be removed at any time
during the anti-crease phase.
Alarm
The appliance is supplied with the Alarm
function deactivated.
When activated, the buzzer sounds:
– At the end of the cycle
– When the anti-crease phase starts or ends
– When the cycle is interrupted
To activate it:
1. Choose the drying programme.
2. Press the Alarm button - the LED above is
on.
To deselect the function press the Alarm
button again. The LED above is off.
Time
Use the Time button to select the programme
duration after setting the Time programme.
You can select a programme duration from 10
mins to 2 hrs in 10-minute steps.
12