John Lewis 1609 Washer/Dryer User Manual


 
17
Using the washing machine
Before the first wash, we recommend that you run a cotton
cycle at 90°C or 95°C, without any laundry in the machine,
to remove any manufacturing residue from the drum and
tub.
Pour 1/2 a measure of detergent into the dispenser drawer
and start the machine.
WASHING
1.Load the laundry
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required and pour it into
the main wash compartment .
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked .
3. Measure out the fabric softener
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
Close the drawer gently.
SM003
SM002
SM002
P0004
4. Switch the machine on
Turn the selector dial to the the desired position to
switch the machine on. To switch the appliance off turn
it to Off.
5. Select the desired
programme/temperature
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The Start/Pause button
light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the cycle.
6. Select the spin speed or the
Rinse hold option
Press the “Spin” button repeatedly in order to select
the desired spin speed or the Rinse hold option. If
you select this option, the last rinse water is not
emptied out.
2.05
Off
14 Minute wash
45 Minute wash
Drying
Drying
95°
Economy 60°
60°
Economy 40°
40°
30°
60°
40°
Delicates 40°
Delicates 30°
30°
40°
Rinses
Drain
Spin
Easy iron 40°
132963590.qxd 27/05/2008 10.45 Pagina 17