Filter
Top Products
30 AC-Series Operator’s Manual-E/F
SHUTDOWN
IMPORTANT: Shutdown procedures should be followed
at the end of each cleaning operation.
1. If a detergent was used, place detergent inlet strainer
in CLEAN water and operate trigger to spray water for
a period of three minutes. This will ush the system of
detergents and help prevent the detergent valve from
sticking or corrosion.
2. Run engine at idle for 2-3 minutes.
3. Turn engine off:
AC-2000GH / AC-2600GH:
a. Move throttle lever (A) to “OFF”.
ALL OTHER MODELS: (AC-2400GH / AC-2400GS
illustrated.)
a. Move throttle lever (A) fully to the right.
b. Turn engine switch (B) to “OFF” position.
c. Move fuel valve (C) left to “OFF” position.
4. Turn inlet water supply off. Squeeze trigger momentarily
to relieve pressure. Disconnect hoses.
5. Allow engine to cool, then wipe washer down with a
damp cloth.
PIC93-102299R0
PIC158•113099R0
A
A
B
C
AC-2000GH / AC-2600GH
AC-2400GH
Operating the Washer
AC-2400GS
PIC93R-121902R0
B
A
C