Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Washer-Extractors
5-08-51
73
Installation
Models IWF033, IWF040, IWF055 and
IWF075 (M-speed)
Surface
The machine must be securely fixed on a flat surface
(metal base, concrete or solid ground). The anchoring
is to be done on the 6 provided places in the holes on
the corners of the base. (See Mounting Bolt Hole
Locations). Refer to Figure 43.
Figure 43
The machine must be placed entirely level. For easy
maintenance it is recommended to keep a minimal
distance of 23.62 in. (600 mm) between the wall and
the back of the machine.
If several machines are placed next to each other, there
should be a minimal distance of 1.18 in. (30 mm)
between each machine.
Anchoring to Metal Base
The machines must be fixed on a metal base which is
securely anchored on a concrete base. Refer to
Figure 44.
Figure 44
CHM2102N
1 Mounting Bolt Holes
Ensure that the machine is installed on a
level floor of sufficient strength and that
the recommended clearances for
inspection and maintenance are provided.
Never allow the inspection and
maintenance space to be blocked.
SW020
CAUTION
CHM2102N
1
CHM2103N
1 Machine Base
2 Nut
.625 in. (M16)
3 Washer
1.57 in. x 0.60 in. x 0.15 in.
(40 mm x 17 mm x 4 mm)
4 Bolt
.625 in. x 2.5 in. (M16X60 mm)
5 Bolt
.625 in. (M16)
6 Concrete Base 15.74 in. (400 mm)
(Models IWF033, IWF040),
21.65 in. (550 mm) (Model IWF055), and
27.55 in. (700 mm) (Model IWF075)
7 Metal Base
CHM2103N
1
2
3
7
4
6
2
3
5