Open as PDF
As the colours of the wires in the lead may not
correspond with the coloured markings iden-
tifyng the terminals in your plug, proceed as
Connect Green & Yellow wire to terminal
marked E or or coloured Green or Green &
Connect Brown wire to terminal marked L or
Connect Blue wire to terminal marked N or
If a 13 amp plug (BS 1363) is used it must be
fitted with a
13 amp fuse, either in the plug or adaptor or
at the distribution board.
If you are in any doubt on the electrical supply
to your machine, consult a qualified electrician
How to connect an alternative plug:
The wires in this mains lead are coloured in
accordance with the following code:
BLUE NEUTRAL (N)
BROWN LIVE (L)
GREEN & YELLOW EARTH (E)
Disposing of the appliance:
When disposing of the appliance please re-
move the plug by cutting the mains cable as
close as possible to the plug body and dispo-
se of it as described above.
! The washing machine should not be instal-
led in an outdoor environment, not even when
the area is sheltered, because it may be very
dangerous to leave it exposed to rain and
! When the washing machine is installed, the
mains socket must be within easy reach.
! Do not use extensions or multiple sockets.
! The power supply cable must never be bent
or dangerously compressed.
13 ampere fuse
! The power supply cable must only be repla-
ced by an authorised serviceman.
Warning! The company denies all liability if and
when these norms are not respected.
The first wash cycle
Once the appliance has been installed, and
before you use it for the first time, run a wash
cycle with detergent and no laundry, setting the
90°C programme without a pre-wash cycle.