Hotpoint WMA63 Washer User Manual


 
Options
The following options can be selected to alter the nature of the
chosen wash programme by changing the spin speed, number of
rinses or the programme temperature. To choose a control option
press the option button and scroll through the option menu’s,
following the display window prompts. If the options is not available
with a particular wash programme the machine will bleep 3 times.
Variable Spin
This control option can only be used to reduce the spin speed of the
selected programme. The maximum spin speed for the selected
programme will be illuminated in the display window then the ‘Variable
Spin’ button is pressed and you will hear a bleep. By pressing the ‘Variable
Spin’ button again, you will hear another bleep and the spin speed will have
been reduced by 100rpm. The spin speed can be reduced to zero (with the
exception of the Spin only programmes, minimum 400rpm) or you can scroll
back to the original spin speed by repeatedly pressing the ‘Variable Spin
button.
This option is available with all wash programmes, including the Rinse
and Spin only programmes.
Variable Rinse
This control option can be used to add a rinse for people with sensitive
skin or to delete a rinse to save water.
A rinse can be added to a wash programme by pressing the
Variable Rinse’ button once, you will hear a bleep and see ‘Add’
‘Rinse’ illuminated in the display window adjacent to the
Variable Rinse’ button.
The ‘Add’‘Rinse’option is not available with the Wool or handwash programmes.
To delete a rinse, press the ‘Variable Rinse’ button twice, you will
hear two bleeps (one for each press of the button) and ‘Reduce’
‘Rinse’ will illuminate in the display window adjacent to the
Variable Rinse’ button.
The ‘Reduce’‘Rinse’ option is not available with Wool, Handwash,
Quickwash and the Rinse and Spin programmes.
Press the ‘Variable Rinse’ button again to cancel the ‘Add’‘Rinse’ and ‘Reduce’
‘Rinse’ options and no lights will be illuminated.
Variable Temperature
This control option can only be used to reduce the temperature of the
selected wash programme. When the ‘Variable Temp’ button is pressed
the maximum temperature for the selected programme will be illuminated in
the display window and you will hear a bleep. By pressing the ‘Variable
Temp’ button again, you will hear another bleep and the temperature will
have been reduced by 5˚C. The temperature can be reduced to a minimum
of 20˚C or you can scroll back to the original temperature by repeatedly
pressing the ‘Variable Temp’ button.
Note: This does not effect the incoming water supply temperature, only the
target machine wash temperature.
This option is not available with the Rinse and Spin programmes.
PROGRAMMES
& OPTIONS
22
ULTIMA BOOK 1666200010-02 04/07/2001 4:02 pm Page 22