Hotpoint WMA63 Washer User Manual


 
Wash programmes
Spin speed
(rpm)
Wash
Temp
˚C
Wash
Label
Press
Button
Display
Window
shows
Fabric
6kg
White cotton and linen
without special finishes
95
6kg
Non-colourfast cotton,
linen or viscose
40
6kg
Colourfast cotton
linen or viscose without
special finishes
60
16
WMA63 - 1600
WMA62 - 1400
WMA63 - 1600
WMA62 - 1400
WMA63 - 1600
WMA62 - 1400
Three
times
Twice
Once
PROGRAMMES
& OPTIONS
Fabric type - Cotton
Maximum
dry weight
load
To select a programme to suit your individual requirements use the following series of
tables, explaining the wash programme buttons and programme details.
The programmes have been listed by Fabric Type.
The programme times ‘Time to End’...
For each wash programme and option(s) selected the machine automatically
calculates the estimated programme length ‘Time to End’. This is displayed in hours
and minutes shortly after the wash programme temperature has been displayed.
The ‘Time to End’ will then remain lit throughout the wash programme and counts
down to the end of the programme.
Note: These estimated programme times are dependant on the temperatures of the
incoming water supply and the option(s) selected.
To review the current wash programme during the wash cycle...
This feature allows you to check the running wash programme.
Press the ‘Start’ button once. The wash programme temperature will be illuminated in
the display window followed by the spin speed.
After a few seconds the display window will return to the ‘Time to End’ showing the
remaining programme length.
If you decide the selected programme does not suit your requirements you can
change the programme, see previous page ‘To change a programme’.
ULTIMA BOOK 1666200010-02 04/07/2001 4:01 pm Page 16