Hoover WDYN D Washer User Manual


 
DRY OPTIONS
Once the washing cycle has finished, remove some of the clothes if necessary to
reduce the load size to the maximum drying weight (see Programme Guide pg.26).
Use the programme dial to select the heat level required. High Dry should be used for
cottons or Low Dry for synthetics. Avoid mixing cottons and synthetics to ensure there
is no damage to the garments.
Select the required drying cycle by pressing the Drying Selection button until the cho-
sen cycle is illuminated on the display (or until no indicator are illuminated if you wish
to cancel the drying selection). Press the Start Pause button to start the drying cycle.
If the drying cycle has been selected before the wash cycle is completed the machine
will automatically commence to the drying programme. Refer to the Programme Guide
(pg.26) to identify which heat level will be automatically selected after the wash pro-
gramme. To protect your laundry, some wash programmes (e.g. Silk) cannot be auto-
matically followed by a drying cycle.
To cancel the drying cycle once the programme has started, hold the Drying Selection
button down for a few seconds until the Cool Down indicator lights up. We recom-
mend that you let the Cool Down period complete before removing the laundry, as the
laundry would be too hot to handle without this phase.
Once the drying cycle has finished, return the programme dial to the OFF position.
Note: Certain materials should not be tumble dried e.g. rubber, plastic or any material
that would melt if heated. Please remove any detergent dispensers from the drum
before drying the laundry. Do not dry unwashed items in the washer dryer.
20
21
Spin Speed
The spin cycle is used to remove as much water as possible from the laundry without
damaging your clothes. The recommended spin speed for each programme is already
set to the highest level for that chosen programme. By pressing the Spin Speed button
you can reduce the spin speed in 100rpm intervals.
To cancel the spin cycle altogether, set the spin speed to 0.
It is not possible to select a spin speed higher than that suitable for the programme
selected. This feature is designed to avoid damage to your clothes.
It is possible to modify the spin speed at any time without stopping or pausing the
machine.
Wash Time Selector
Once the programme has been selected the indicator light will automatically show
the wash time set for that programme. Selecting a different wash time the relevant
indicator will light up. For example: Using this button on the Rapid Wash cycle will
enable you to select either a 14, 30 or 44 minute wash cycle.
This selection is only available on the Cotton, Synthetic and Rapid programmes.
Sensor Dry
Programmes
Time Dry
Programmes
Airing
Programmes
Extra Dry
Store Dry
Iron Dry
120’
90’
60’
30’
Cool Down
Longer drying cycle suitable for towels, bathrobes
and bulky loads
Standard drying cycle for items that can be put
away without ironing
Leaves the laundry slightly damp which makes
fabrics easier to iron
120 Minutes of drying
90 Minutes of drying
60 Minutes of drying
30 Minutes of drying (advisable for loads of less
than 1kg)
Tumbling of laundry in cool air for 10 minutes
Programme Description