Hoover VISION HD Washer User Manual


 
30
Note: it is advisable to turn off the tap after each wash
to isolate the washing machine from the water supply.
For the washing machine to function properly the terminal end of the discharge hose (mouth)
must be at a minimum of 50 cm and a maximum of 85 cm from the ground.
Electricity supply and safety advice
This Washing machine is supplied to operate at a voltage of 230-240V, 50 Hz single-phase.
Plug connection must be to a suitable 10A earthed socket.
After installation,the appliance must be positioned so that the plug is accessible.
Check that the electricity supply to your home has an earthing system.
The socket in your home and the plug on the appliance must be of the same type.
WARNING: Do not use this appliance with a cord extension set, multiple
connector or electrical portable outlet device due to risk of overload,
splashing or ingress of moisture.
All Hoover washing machines comply with the safety requirements laid down by the Quality
Trademark Institute.
Should the power supply cord of this appliance be damaged, it must be replaced by an
authorised Hoover service centre or qualified person in order to avoid a hazard.