Filter
Top Products
12
2) SPIN SPEED
Once the programme has been selected, the maximum spin speed allowed for that
programme appears on the display. Pressing the spin button will reduce the speed by 100
rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is
possible to omit the spin by pressing the spin button repeatedly.
3) DELAY START LIGHT
This flashes when delay start has been set.
4) WASH CYCLE TIME
When a programme is selected the display automatically shows the maximum cycle duration
for a full load, which can vary, depending on the options selected. Once the programme has
started you will be kept informed constantly of the time remaining to the end of the wash.The
appliance calculates the time to the end of the selected programme based upon a standard
loading, during the cycle, the appliance corrects the time to that applicable to the size and
composition of the load.
5) Kg MODE Indicator
Available on Cotton and Synthetic cycles, during the first 4 minutes of the cycle the intelligent
sensor will weigh the laundry and adjust the cycle time, water and electricity consumption
accordingly.
6) WASH TIME
When a programme is selected the relevant indicator will light up to show the minimum
possible wash time.
Selecting a greater time using the special button will cause the corresponding indicator to
light up.
“WASH TIME” button
By selecting this button (active only on COTTON and MIXED FIBRES programmes) there is a
choice of 3 levels of wash times (long, medium end short), depending on how much the fabrics are
soiled.
Once the programme has been selected the indicator light will automatically show the minimum
level required for that programme. Pressing the button increases the duration of the wash cycle,
and adjusts the wash settings accordingly. For example: Using this button on the Rapid Wash
cycle will enable you to select either a 14, 30 or 44 minute wash cycle.
M