Hitachi SF-S55GR Washer User Manual


 
39
Content of the Washing Process
This part describes the process of each process.
( ) indicates it may be manually switched within the range contained in the bracket by pressing
the buttons. No ( ) means no switch.
( ) ( )
105
105 min
31
31 min
70
70 min
15
15 min
50~20L
(50~20L)
30L
(30~20L)
9
9 min
3~6
3~6 min
39
39 min
1
1 min
Process
NORMAL
SILK
Washing Spinning
Required duration
(approximate)
Rinsing
Round 1
Water-storage
rinsing
Water-storage
rinsing
60
60 min
50~20L
(50~20L)
9
9 min
SOAK
Water-storage
rinsing
Water-storage
rinsing
3
3 min
30L
(50~20L)
6
6 min
SPEEDY
Water-storage
rinsing
Water-injection
rinsing
Water-storage
rinsing
Water-storage
rinsing
50L
(50~20L)
25
25 min
73
73 min
9
9 min
BLANKET
Water-storage
rinsing
Water-storage
rinsing
50~20L
(50~20L)
15
15 min
50
50 min
6
6 min
PRESET 9HR
9
Water-storage
rinsing
Water-storage
rinsing
50L
135
135 min
190
190 min
30
30 min
BASKET CLEAN
Water-storage
rinsing
Water-storage
rinsing
30
30 min
50~20L
(50~20L)
6
6 min
HEAVY
Sprinking rinsing
Water-storage
rinsing +
Water-injection rinsing
Round 2
Automatic setup
of water level
+
46
46 min
Time required for washing
The washing time includes the time of charging (volume of
15L per minute) and draining (standard condition).
15L
The washing time depends on the water pressure, washing
quantity and drainage condition etc.
In the "NORMAL", "HEAVY", "SPEEDY", "SOAK" processes,
the washing machine determine the optimum washing mode
by checking the load and texture of the washings. The time
shown in the above table are ones in standard condition.
(marked with
).
There are certain errors between the "washing time" &
"spinning time" and the actual operation time.
In the "NORMAL", "HEAVY", "SPEEDY", "SOAK" processes
,
the washing machine will stir the clothes for 2-4 minutes
after final spinning for fluey effect. (stirring may not be
made for some washing loads.)
Change of the options in the modes
( ) indicates it may be manually switched within the range
contained in the bracket by pressing the buttons.
( )
Options in modes can't be changed after the completion of
the "washing" process.
Changes can't be made during the period from the begin-
ning of charging to the time when the level of charged
water reach the stated standard.
Switch of modes
Modes can't be switched after the starting of washing
machine. If it is necessary to switch, please cut off the
power supply first, and then proceed with the switch.