Filter
Top Products
23
NORMAL Process
Put the laundry in and press the "POWER
SWITCH" button .
The unit is set automatically to the "NORMAL"
process.
• In the case of any process other than "NORMAL", press the
"PROGRAM" button to switch over.
Press "START" button .
Put in the detergent according to the amount
(approximate)
Pour in detergent and close the lid.
(The sound of buzzer indicates washing completion)
• The pulsator to detect the amount of laundry and display
on the control panel.
18
18
• After the detergent amount and the water level are
displayed, the washing machine will pause about 1 minute
for putting in the detergent.
(Press the "WATER LEVEL" button, and the washing
machine starts operation)
1
• After the lid is closed, the washing machine will detect at
the low water level and the required water level in order to
dissolve the detergent and know about the quality of
laundry, then it will decide the necessary mode of washing.
Detergent Powder synthetic detergent
Liquid detergent
• How to put detergent in 19~20
19~20
Sufficient wash with economic consumption
of water, electricity and time