Filter
Top Products
15
In the case of any of the following manual setup, the washing machine will make 2 sounds for acceptance (to announce the datum
mark of indication):
2 ( )
1 The water level is "50L"; 2The washing manual is "Wash+Rinse+Spin"; 3 The process is "NORMAL"; 4 Powerful Dehydration
is "No setup".
1 50L 2 + + 3 4
There are eight options available, you
can choose the right one based on
the types and dirty levels of the
washings . 22
8
22
¡By pressing the "PROGRAM" button,
the indicator of the selected process
will light or flash.
PROGRAM button
The button is used to start the
operation or temporarily pause the
operation.
ઢ
¡After selecting the required process,
press this button to start or pause the
process operation.
ઢ
¡If press the "Pause" button during the
course of spinning, no button signal
can be received until the switching off
the power, and the lid can't be opened.
START/PAUSE button (One touch button)
ઢ
Used to "switch on" and "switch off"
the power.
¡When the washing cycle finishes,the
buzzer beeps and the power of the
unit will be switched off automatically.
The washing machine will be
automatically switched off after 5
minutes of no start with power on.
53
ઢ
5
53
POWER switch
Lid Lock indicator will light when the lid is in locked status.
¡Before the water supply, the lid is in the status of locking.
Lid Lock indicator
The indicator of selected process will light or flash.
With each pressing on the "PROGRAM" button, the
indicator will light in the following sequence.
Programme indicator
9
NORMAL
Light
SOAK
Light
HEAVY
Light
SPEEDY
Light
BLANKET
Flash
PRESET 9HR
Flash
BASKET CLEAN
Flash
SILK
Flash