Hamilton Beach 840159500 Iron User Manual


 
5
Power On Light
The Power On light comes on when the
iron is first
plugged in, and
will remain on
until the iron is
unplugged. The
light will stay on,
even if Fabric
Setting Indicator
is OFF.
Auto Shutoff
The iron will shut off after 1 hour and
the indicator
box around
OFF in the
Fabric Setting
indicator will
blink on and off.
Press the Temperature Selector to turn
the iron back on
for another hour
of ironing.
Retractable Cord
1. Pull cord to desired length. Do not
unwind cord
beyond
colored tape
indicator on
cord.
2. To store cord, press and hold the
Cord Release
Button while
guiding the
cord into the
storage area.
ww
WARNING: To reduce the risk of
an eye injury, hold the plug while
retracting the cord.
Vertical Steam
1. Follow Steps 1 through 3 in
“To Steam Iron.”
2. Hang garment in a location that is
not susceptible to damage from
heat or moisture. Do not hang in
front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches away from
garment and
press and
release the
Blast Button
to steam out
wrinkles. Wait
at least 3-5
seconds before
pressing Blast
Button again.
4. To turn iron off, press Temperature
Selector. Set Fabric Setting Indicator
to OFF. Unplug iron. The iron may
be turned off by pressing the
Temperature Selector button for 3
seconds.
5. Empty water from the iron following
directions in “Caring for Your Iron.”
NOTICE: Do not allow hot soleplate to
touch delicate garments.
Temperature
Selector
Power
On
Light
5 LINEN
4 COTTON
3 RAYON
2 POLYESTER
1 SILK
OFF
Features (continued)
840159500 Ev02.qxd 4/2/07 2:28 PM Page 5