Filter
Top Products
4
1. Unplug iron. Turn Steam ON/OFF
Lever to the Dry Iron position.
Set iron upright on heel rest. Using a
cup, slowly pour tap water into the
water tank opening until MAX fill line
is reached.
2. Plug in iron.
3. Press Temperature Selector. With
iron in an upright position, set Fabric
Setting Indicator to desired setting in
the steam range (see chart on page
6). Allow the iron to heat until the indi-
cator box around the selected fabric
stops blinking. Do not preheat the
iron with the soleplate facing down.
4. Set Steam ON/OFF Lever to steam.
5. To turn iron off, turn Steam ON/OFF
Lever to Dry Iron . Press
Temperature Selector. Set Fabric
Setting Indicator to OFF and unplug
iron. The iron may be turned off by
pressing the Temperature Selector
button for 3 seconds.
6. Empty water from the iron following
directions in “Caring for Your Iron
and Soleplate.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
4. To turn iron off, set Fabric Setting
Indicator to OFF and unplug iron.
The iron may be turned off by press-
ing the Temperature Selector button
for 3 seconds.
1. Plug in iron.
2. Turn Steam ON/OFF Lever to the
Dry Iron position.
3. Set Fabric Setting Indicator to
desired temperature. Allow the iron
to heat until the indicator box
around the selected fabric stops
blinking.
Blast of Steam and Spray Buttons
Push Blast Button for an extra blast
of steam. Push
Spray Button to
release a fine
spray of water
for difficult wrin-
kles in cotton or
linen.
Quick Off
Press and hold the Temperature
Selector for
3 seconds to
turn the iron off
quickly.
Spray
Blast
Temperature
Selector
Using Your Iron
To Dry Iron
To Steam Iron
Features (on select models)
840159500 Ev02.qxd 4/2/07 2:28 PM Page 4