Filter
Top Products
Blast of
Spray
Blast of
Steam
5 LINEN
4 COTTON
3 RAYON
2 POLYESTER
1 SILK
OFF
3
• Steam vents should be cleaned
before first use. Prepare iron for
steam ironing, then iron over an old
cloth for a few minutes while letting
the iron steam. Press the Blast button
several times to clean the vents. Then
follow the Self-Cleaning instructions.
• Many irons spit or sputter during
the first few uses with tap water.
This happens as the steam chamber
becomes conditioned. This will stop
after a few uses.
• During first use of the iron, it may
appear to smoke. This will stop
and does not indicate a defect or
hazard.
Before First Use
Parts and Features
* on select models
Retractable
Cord*
Cord
Release
Button*
Fabric Setting Display/
Automatic Shutoff
Status Indicator
Temperature Selector/
Automatic Shutoff Reset
Button
Water Tank
Fill Hole
Soleplate
Self-Clean
Button
Water Tank
Power ON
Light
Heel Rest
Steam
ON/OFF
Lever
840159500 Ev02.qxd 4/2/07 2:28 PM Page 3